Toro Loco 0 Posted July 2, 2018 Report Share Posted July 2, 2018 Hello all! I have the dreaded no movement in any gear issue. I have the engine supported, sub frame removed, and the trans unbolted from the engine. (I think) I have 3 bolts and one nut on the passenger side removed, and 7 bolts on the drivers side removed. The issue is the trans does not want to separate from the engine. Did I miss a bolt or am I not trying hard enough? Thanks!! Quote Link to post Share on other sites
Toro Loco 0 Posted July 3, 2018 Author Report Share Posted July 3, 2018 Update: I did find that I had missed a bolt at the back of the engine down low. Unfortunately, this has not resolved my issue as the trans still will not separate from the engine. I have counted nine bolts at the bellhousing side, and three bolts and a nut on the passenger side. Can anyone tell me if this is correct? Thanks! Quote Link to post Share on other sites
ShelbyRacer78 247 Posted July 4, 2018 Report Share Posted July 4, 2018 what about the convertor bolts? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.