Update: I did find that I had missed a bolt at the back of the engine down low. Unfortunately, this has not resolved my issue as the trans still will not separate from the engine. I have counted nine bolts at the bellhousing side, and three bolts and a nut on the passenger side. Can anyone tell me if this is correct? Thanks!
Hello all! I have the dreaded no movement in any gear issue. I have the engine supported, sub frame removed, and the trans unbolted from the engine. (I think) I have 3 bolts and one nut on the passenger side removed, and 7 bolts on the drivers side removed. The issue is the trans does not want to separate from the engine. Did I miss a bolt or am I not trying hard enough? Thanks!!