Coreyp

Im looking for a Black leather driver side seat bottom only.I'm putting Taurus buckets in my 01 Mercury Grand Marquis.I found one black interior Taurus in the local junkyard but the butt cushion has a couple tears.The passenger seat and the driver seat back are in great shape.Also need the manual lumbar knob as it was broken as well.

I knew if I waited long enough I would find out what the possible problem was with my car.I have a 99 Taurus SHO with the same transmission and exact same problem. I thought the trans was shot so I bought a complete motor and trans but have never got around to installing it.Now I think I may try swapping valve body and see if it fixes it.Would be nice if it did the car has been sitting for a little over a year and I kinda miss driving it.

https://www.youtube.com/watch?v=-dK8yj0XeDQ happened to stumble across this weird video on you tube.I guess with the 4th of July coming up you could show off your pride driving it around town.

http://vid933.photobucket.com/albums/ad171/fordtaurus/1999%20Taurus%20SHO/100_1364_zps9824d9cf.mp4 http://vid933.photobucket.com/albums/ad171/fordtaurus/1999%20Taurus%20SHO/100_1363_zps9cdf74cb.mp4 I did this on my 99 SHO but I also put a sequential turn signal module on it.The only thing is you have to modify the turn signal relay to make it blink slower http://i933.photobucket.com/albums/ad171/fordtaurus/1999%20Taurus%20SHO/100_1359_zps549b70fe.jpg the blue capacitor is what I replaced to make it blink slower

I spotted them in 2013,this was the first time the did a complete mapping of our city.I followed them around for a little bit so I might show up in a few different places,this is one of the better ones https://www.google.com/maps/@40.9093859,-90.6509173,3a,75y,100.63h,63.25t/data=!3m4!1e1!3m2!1sNi3zlQ0DHjNmGgt00zbN7A!2e0 here is one farther away https://www.google.com/maps/@40.909278,-90.650922,3a,75y,34.14h,53.75t/data=!3m4!1e1!3m2!1sMOp49rJwp2E2AjhXBpd3rA!2e0 I even found the one when we followed them in my brothers truck https://www.google.com/maps/@40.9194902,-90.6481074,3a,75y,255.89h,48.92t/data=!3m4!1e1!3m2!1sqVlV_ulgPor_UO28QPPRzQ!2e0 he was driving I was in the passenger seat

http://www.autoevolution.com/news/2015-chevrolet-corvette-z06-convertible-has-serious-crash-in-michigan-88758.html It appears the Vette took the brunt of the damage on this one.

Thanks for the idea guy's I'll try them and see what results I get.I think it may need a new starter first though,http://i933.photobucket.com/albums/ad171/fordtaurus/th_20141008_1826011_zps50b20670.mp4 <--link opens a video I took when I used a jump pack to try and use the starter to turn the motor over.

I picked up this motor at the junkyard yesterday.It has a little over 84K,the picture are of the front and rear heads after I pulled the valve covers.Also there was no metal shavings or flakes of any kind anywhere near the cam or in the heads at all.So from the pictures does it appear that this motor suffered the same fate as many others have or is it good to go after the cams are weld. http://s933.photobucket.com/user/fordtaurus/library/Low%20millage%20SHO%20motor I got the motor,trans and entire subframe with everything still attached for $500,and $100 for the rest of the parts I got from the car.the bumpers,both fenders,trunk lid,front SHO floor mats and JBL rear radio control

Not much has happened to it in the last year other then it has been sitting since about October last year after the transmission went out.That should change next spring after the junkyard haul today.I found a 96 SHO with only 84K in the junkyard today.I got the entire sub frame motor,trans and all both front fenders the front and rear bumper,SHO front floor mats,JBL rear radio control box and the trunk lid all for only $600.Not sure on the motor yet need to pull the valve cover to find out if cam fail or not.If not the whole thing will replace the one in the 99 since it has about 150k.The fenders and bumpers will go on my red 96 GL,and possibly one of the sho motors to replace the vulcan that's in it now.First I need to get it back together, can't believe it been on blocks in the garage for almost 3 years now.

This is what the rim looks like http://www.superford.org/getfile.php?id=107358&toggle=fullsize&f=97-02%20Handling%20Package%20Wheel.jpg,the center cap is just the round part in the middle.This is the 98+ style also the older style is different.

I'm looking for a set of 4 16" HPP Lacy spoke center caps for a Mercury Grand Marquis.I found the 4 rims at the junkyard today but no center caps.

I found a rusted out 98 SHO at my local junkyard today so I have a few parts for sale. silver frost rear spoiler few scratches no peeling paint or clear-$45 shipped K&N air filter just needs cleaned-$25 shipped complete upper intake includes throttle body and MAF and top of the air box not included is the surge tank good shape again just needs cleaned about 160xxx on it- $75 shipped CLICK IMAGE FOR LARGER VIEW

OK, that's a good thing,Mine are rusted pretty good.

Does any body know if the rear sway bar bushing brackets are different from the small 19mm bar found on my 99 SHO to the larger one I picked up from a 94 SHO.I know I'll need new bushings but I wasn't sure about the bushing bracket it's self. http://www.ebay.com/itm/1992-1995-Ford-Taurus-SHO-Rear-Factory-Sway-Bar-/191033094454?_trksid=p2047675.l2557&ssPageName=STRK%3AMEWNX%3AIT&nma=true&si=bBTpWkUzWfkDXjsQg%252B6%252FKQ5TKMI%253D&orig_cvip=true&rt=nc

2005 was the first year for the 4.0 v6 in the Mustang.Mines a 2000 and has the 3.8L,and it defiantly isn't slow.It isn't stock ,but only has a few engine mods,91 performance tune,under drive pulley,and 4:10s with LSD.This is an older video before the 4:10s,and 91 tune https://www.facebook.com/photo.php?v=2034548901482&l=9087391272059771340.I need to make a new video once it wakes up from winter hibernation. It could probably take the SHO off the line,but once the secondaries kick in the SHO would pull away in a hurry.

I'm not sure on that.I know on my 00 V6 Mustang It was above the filter.I removed that one to have the J-mod done on it.If I can't remove it then I'll have to have it towed in to get fixed.If the transmission does need pulled It will give me a reason to install on of those Transgo shift kits while its out

Mine doesn't have the OD button so it only goes to 1st.So do you think getting my current valve body rebuilt would be a good idea to try then.

The problem happened when I went to drive on some 2x4's to raise the car up to replace my rusted out Y-pipe.I put it in D and nothing tried regular D nothing,put it in 1st and got the RPM's up around 2k and it will move very slowly forward ,less then 1 MPH no faster.Reverse works fine.I also noticed since the drive way has a slope that in drive and no brakes on the car will roll backwards.The transmission never showed any problems before this happened.I have checked the fluid and it is at a normal level and the fluid/filter was just changed about 2 months ago.

we got about 6 to 6.5 of the white stuff yesterday thru late last night.

seems to have fixed its self.Just tried again and it worked.I have had to try and remember a few password I'd hardly use today since I updated my old computer from Vista to Windows 8. 8 is so much better but it cleared my internet browser out of all my old settings.